The American Auto Barn Ltd    
Online Catalog Home Page   Ordering Information     To Order Online Click Here

  American Auto Barn Gift Certificates - Order Online for Xmas - Click Here! 

Home
Up
BAR STOOLS
Bed Covers
Ford Racing
AUTOMOTIVE CLOCKS
Logo Floor Mats
Logo Mud Flaps
Car & Truck Lighting
Dixie Horns
Truck Accessories
ANCO Winter Blades
KEY CHAINS
TOOLS & DIAGNOSTIC AIDS
Chrysler Voyager
Van Accessories
WoblinGoblins
Wheels and Tires
Sheet Metal
Fuzzy Dice
Glasscapes
Custom Accessories

RHD Light Conversions

We supply a full line of lighting products for MOT & SVA conversion from RHD headlamp units, side-turn repeaters, foglights and reverse lights to convolute tubing for wiring looms.

Headlight Conversions

We carry  the full line of high quality Cibie-Valeo replacement halogen headlights to allow you to convert the feeble US-standard sealed beam lights to bright RHD-Dip Halogen headlights.  Apart from the fact that these lights are fully UK legal and E marked (no arguments with MOT inspectors etc) they accept the widely available Quartz-Halogen H1 and H4 bulbs available from ourselves or at most garages, for vastly improved night vision and they are available in the four common sizes used by most US cars from the 1940's to 1990's. Most are available with integral sidelights allowing easy modification of the lighting to meet UK regulations.  Please note these are universal fit lights and you may need to modify headlamp buckets and /or wiring on some vehicles to get clearance needed for the bulb holders  for the sidelights.  

We also supply a range of excellent WAGNER US halogen sealed beam units which are not available with sidelights but  fit most headlight buckets easily without modification. As with regular sealed beam units however, you have to replace the whole assembly when the bulb blows.

5-3/4" (145mm) Round Commonly used in Quad headlight set ups from  1950's up.Available as:-
  • Main Beam (H1 Bulb)
  • Dip/Main Beam with sidelight (H4 Bulb)
  • Dip/Main Beam no sidelight (H4 Bulb)
  • Light units are RHD Pattern, supplied individually, Bulbs must be ordered seperately. 
  • Quad light set-up will use 2 x Main Beam and 2 x Main/Dip Beam
7" (175mm) Round Widely used on many US cars and trucks of all ages eg. Camaro. Available as
  • Dip/Main Beam with sidelight (H4 Bulb)
  • Dip/Main Beam no sidelight (H4 Bulb)
  • Above units also available as LHD Dip for Continental use
  • Light units are  supplied individually, Bulbs must be ordered seperately. 
Large Rectangular (180mm x 120mm) Widely used on Late 1970's & 80's cars & trucks eg. Chevy G20, Pontiac Fiero etc.   Available as
  • Dip/Main Beam with sidelight (H4 Bulb)
  • Dip/Main Beam no sidelight (H4 Bulb)
  • Light units are RHD Pattern, supplied individually, Bulbs must be ordered seperately. 
Standard Rectangular (165mm x 105mm) Widely used on Late 1970's & 80's cars & trucks with quad headlights eg Pontiac Trans-Am Available as
  • Main Beam (H1 Bulb)
  • Dip/Main Beam with sidelight (H4 Bulb)
  • Dip/Main Beam no sidelight (H4 Bulb) SORRY NO LONGER AVAILABLE
  • Light units are RHD Pattern, supplied individually, Bulbs must be ordered seperately. 
  • Quad light set-up will use 2 x Main Beam and 2 x Main/Dip Beam

 

Side Turn Repeater Lights

These are required on all late model vehicles - the majority of imported US vehicles will need fitting with side-turn signal repeaters to pass MOT/SVA as their existing turn signal lighting does not meet European specifications . Fortunately this is an easy modification to make - all that is needed is the addition of two small side repeater lights . Normally these are fitted just above and behind the front wheelarch. You could use a pair of lights from any European car (eg Ford Mondeo or Fiesta) salvaged from a breakers yard, however almost all of these require a sizeable mounting hole to be drilled to accommodate them. Our preferred solution is to use aftermarket hi-visibility LED lights. These are available fully legal " E-marked" and are self adhesive - and with only a small 5mm hole being required to run the wiring through the bodywork, they are easy to install.

US LED Side repeaters £27.99 (pair). These work well on trucks. E-Marked Low Profile LED Side Repeater £19.99 (pair) Vauxhall Side Turn Repeater £24.99 pair

Rear Fog & Reverse Lights

Rear Fog Lights are mandatory on all late model UK vehicles - and a good safety retro-fit on older cars too. We supply basic aftermarket E-marked foglights and reverse lights for MOT/SVA conversions.  These light units can simply be bolted to the rear bumper - and include bulbs & brackets.

   
 Rear Foglight Unit £9.99 Reverse Light Unit £9.99


Driving Lights and Fog Lights

We supply an extensive range of vehicle lighting from Ring, KC Hilites, PIAA, Pilot and others - more details are in our main catalog -

 

   PHONE 01733 553132   +44 1733 553132

PLEASE NOTE WHEN COMPARING PRICES TO USA  ALL OUR PRICES INCLUDE ALL SHIPPING AND IMPORT CHARGES AND VAT AT 17.5%!